Location: guide/enforcement-case-studies_log-output/thinkpenguin_u-boot-finish_build.log

Denver Gingerich
Add log files from the build steps, mention in doc
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$ TMPDATE=`date`; time make tplink_wr841n_v8; echo $?; echo "$TMPDATE"; date
Makefile:219: warning: overriding commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:188: warning: ignoring old commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:219: warning: overriding commands for target `cpu/mips/libmips.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/libmips.a'
Makefile:219: warning: overriding commands for target `cpu/mips/ar7240/libar7240.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/ar7240/libar7240.a'
======= Configuring for TP-Link TL-WR841N/D v8 at: Fri Oct 17 11:29:30 EDT 2014 =======
Makefile:219: warning: overriding commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:188: warning: ignoring old commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:219: warning: overriding commands for target `cpu/mips/libmips.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/libmips.a'
Makefile:219: warning: overriding commands for target `cpu/mips/ar7240/libar7240.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/ar7240/libar7240.a'
a - crc32.o
a - ctype.o
a - display_options.o
a - ldiv.o
a - string.o
a - vsprintf.o
a - LzmaWrapper.o
a - LzmaDecode.o
a - main.o
a - cmd_bootm.o
a - cmd_boot.o
a - cmd_flash.o
a - cmd_mem.o
a - cmd_custom.o
a - cmd_net.o
a - cmd_nvedit.o
a - cmd_itest.o
a - command.o
a - console.o
a - devices.o
a - dlmalloc.o
a - environment.o
a - env_common.o
a - env_nowhere.o
a - exports.o
a - flash.o
a - lists.o
a - env_flash.o
a - hush.o
a - db12x.o
a - ../common/ar7240_pci.o
a - ../common/ar7240_flash.o
a - ../common/athrs27_phy.o
a - ../common/lowlevel_init_934x.o
a - cpu.o
a - cache.o
meminit.c: In function 'wasp_ddr_initial_config':
meminit.c:242:2: warning: 'type' may be used uninitialized in this function [-Wuninitialized]
meminit.c:205:2: warning: 'tap_val' may be used uninitialized in this function [-Wuninitialized]
meminit.c:223:2: warning: 'cycle_val' may be used uninitialized in this function [-Wuninitialized]
meminit.c:186:3: warning: 'ext_mod' may be used uninitialized in this function [-Wuninitialized]
meminit.c:164:2: warning: 'ddr_config2' may be used uninitialized in this function [-Wuninitialized]
meminit.c:161:2: warning: 'ddr_config' may be used uninitialized in this function [-Wuninitialized]
ar7240_serial.c: In function 'ar7240_sys_frequency':
ar7240_serial.c:51:52: warning: unused variable 'frac' [-Wunused-variable]
ar7240_serial.c:51:45: warning: unused variable 'nfrac' [-Wunused-variable]
a - meminit.o
a - ar7240_serial.o
a - ag934x.o
a - board.o
a - time.o
a - mips_linux.o
a - netconsole.o
a - pci.o
a - net.o
a - tftp.o
a - rarp.o
a - eth.o
a - bootp.o
a - sntp.o
a - httpd.o
a - date.o
a - uip.o
a - uip_arch.o
a - uip_arp.o
a - httpd.o
a - fs.o
a - bootstrap_board.o
a - LzmaDecode.o
a - string.o
a - crc32.o
a - LzmaWrapper.o
a - time.o
Image Name: u-boot image
Created: Fri Oct 17 11:29:34 2014
Image Type: MIPS Linux Firmware (lzma compressed)
Data Size: 48569 Bytes = 47.43 kB = 0.05 MB
Load Address: 0x80010000
Entry Point: 0x80010000
make[1]: Entering directory `/home/denver/thinkpenguin/extract/librecmc-u-boot'
======= Preparing 64KB file filled with 0xFF... =======
64+0 records in
128+0 records out
65536 bytes (66 kB) copied, 0.000202628 s, 323 MB/s
======= Copying U-Boot image... =======
123+1 records in
123+1 records out
63305 bytes (63 kB) copied, 0.000114554 s, 553 MB/s
======= U-Boot image ready, size: 65536 bytes =======
make[1]: Leaving directory `/home/denver/thinkpenguin/extract/librecmc-u-boot'
real 0m3.658s
user 0m2.643s
sys 0m1.052s
0
Fri Oct 17 11:29:30 EDT 2014
Fri Oct 17 11:29:34 EDT 2014
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$